Verti-Drain 7416

Krigger & Company, Inc.

"Proudly serving the turf maintenance industry since 1924"

1-800-252-TURF (8873)

or 724-444-5744

Home QuickLinks Product Catalog About Krigger Contact Us

NEW Products
	Aerators
	Blowers
	Brushes
	Bunker Rakes
	Chainsaws
	Clearing Saws
	Dethatchers
	Engines
	Fairway Mowers
	General Maint.
	Greens Mowers
	Grinders
	Infield Rakes
	Material Handling
	Par Aide
	Reel Trim Mowers
	Rollers
	Rotary Mowers
	Safety Apparel
	Seeders
	Sharpening
	Sod Cutters
	Sprayers
	Spreaders
	Standard Golf
	Sweepers
	Top Dressers
	Tractors
	Turf Trucksters
	Used Equipment
	Utility Vehicles
	Vacuums
	Vehicles
	Verticutters
	Walk Behinds
	Zero Turns ZTRs

Verti Drain 7416

The Verti-Drain 7416 incorporates the technology of the second-generation Verti-Drain line with new and improved features. The 7416 has a working width of 63” (1.6m)and is lighter weight than the 7516, thus can be used with smaller tractors. This latest version expands the range to 10 different models to choose from.

Verti-Drain's parallelogram design shatters the soil. Coring tines are also available on all models.


Model	Verti-Drain 7416
Working width	64” (1.60 m)
Working depth	Up to 14” (350 mm)
Tractor speed@500 rev’s at PTO Spacing 2 1⁄2” (65 mm) Spacing 5” (130 mm) Spacing 7 1⁄2” (195mm)	Up to 0.55 mph (0.85 km/h) Up to 1.10 mph (1.75 km/h) Up to 1.60 mph (2.60 km/h)
PTO speed: (max)	Up to 500 rpm
Weight	1,914 lbs (870 Kg)
Hole spacing side-to-side	5” (130 mm) @ 3⁄4” (18 mm) holes 2.5” (65 mm)@ 1⁄2” (12 mm) holes
Hole spacing in driving direction	1” - 7 1⁄2” (25 mm – 195 mm)
Recommended tractor size	35 HP with lift capacity of minimum 2,310 lbs (1,050 Kg)
Capacity (maximum) Spacing 2 1/2” (65 mm) Spacing 5” (130 mm) Spacing 7 1/2” (195mm)	- Up to 14,921 sq ft (1,387 sq m)/ hour Up to 29,841 sq ft (2,773 sq m)/ hour Up to 44,762 sq ft (4,160 sq m)/ hour
Shipping dimensions	68” x 32” x 48” (1.7m x 0.8 m x 1.2 m)
Maximum tine size	Solid 3⁄4” x 12” (18 mm x 300 mm) Hollow 1” x 10” (25 mm x 250 mm)
Slip clutch setting PTO	Maximum 4,400 lb inch (500 Nm)
Three point linkage	3- point CAT 1
Transmission oil	Life time grease EP 00
Lubrication grease	EP 2
Standard items	Set solid tines to 1⁄2" x 12” (12mm x 300mm) Front and rear roller 3- shuttle gearbox


FEATURE	BENEFIT
Unique adjustable parallelogram forced heave	Shatters compaction in any ground conditions. Versatile with single-point adjustment for optimum results and hollow coring
3-speed gearbox	Matches your tractor’s ground speed exactly to achieve desired hole spacing. Creep speed tractor gear not essential
Sealed bearings not bushings	Long maintenance free life
Simple tine design	Easy to change and cheap to replace
1⁄2” (12 mm) or 1” (25 mm) solid & hollow tines	Choice of tines for varying conditions

Home \| Product Catalog \| Used Equipment & Specials \| Site Index \| Calendar of Events \| Employment \| About Krigger \| Contact Us
Our Address:		Phone , Fax , email
4360 Gibsonia Road		Toll Free 800.252.TURF (8873)
P.O. Box 1427		Phone 724.444.KRIG (5744)
Gibsonia, PA 15044-1427		Fax 724.444.1027
(north of Pittsburgh, PA)		email webmaster
Copyright © 2006 [Krigger & Company, Inc.]. All rights reserved.