326Ex
An efficient and versatile edger with high power and low weight. The front handle can quickly be adjusted using the wing nut. A wear plate under the engine and a reinforced spark plug guard protect against impact and shocks.
The support wheel can quickly be set to different edging depths. The guard is designed to prevent stoppage due to gravel and soil.
E-TECH II
The E-TECH II engine combines high torque, reduced emissions and low noise with a superior power / weight ratio.
Hard chromium
Hard chromium plated cylinder bore provide increased durability and extended product life.
Wrought connecting rod
Forged connecting rod and three-piece crankshaft for extended product life.
Cutting depth
Easy cutting depth adjustment.
Precision and access
Large support wheel for increased precision and access
Easy starting
Air purge designed for very easy starting. Transparent fuel tank for checking the fuel level.
326Ex
  Enginge specification
  Cylinder displacement 1.5 cu.inch / 24.5 cm³   
  Cylinder bore 34.0 mm   
  Power 1.2 hp / 0.9 kW   
  Maximum power speed 8400 rpm   
  Maximum recommended engine speed 11000-11700 rpm   
  Type of carburator Zama C1Q   
  Fuel tank volume 1 US pint / 0.5l   
  Fuel consumption 550 g/kWh   
  Transmission
  Gear ratio/drive gear angle 1:1.46 / 30°   
  Equipment
  Cutting depth 68 mm   
  Emission, vibration & noise data
  Vibration idling left/right min 4.0 m/s² / 2.0 m/s²   
  Vibration idling left/right max 4.0 m/s² / 2.0 m/s²   
  Vibration top speed left/right min 7.3 m/s² / 5.9 m/s²   
  Vibration top speed left/right max 7.3 m/s² / 5.9 m/s²   
  Sound level, min/max 96 dB(A) / 96 dB(A)   
  Emission, HC 51 g/kWh   
  Emission, NOx 0.6 g/kWh   
  Emission, CO 264 g/kWh   
  Overall dimensions
  Weight 11.9 lbs / 5.4 kg   
Advantages
• Soft handles for optimum comfort.
• Lightweight.
• Large blade housing prevents stoppage due to dirt and debris.
• Reinforced bevel gears for extended product life.
• Generous cutting depth.