|
Home
-> Product Catalog -> Blowers |
|
Hand
Held | Backpack | Push Type
| Tractor Mounted |
|
Related Products:
Sweepers |
|
Hand Held Blowers
(back to top) |
 |
HUSQVARNA 125B Handheld
Blower
with 170 mph, max air velocity; 18 fl. oz. fuel capacity; 9.4 lbs; low
vibration system, and air volume at tube/housing 445/445 cfm |
|
Backpack Blowers
(back to top) |
 |
HUSQVARNA 350BT Backpack Blower
with 3.1 cu.in engine, 180 mph max. air velocity, 495 cfm; 44 fl.oz fuel
cap.; 22.5 lbs without accessories; features low vibration; lifetime shaft &
ignition warranty
|
 |
HUSQVARNA 180BT Backpack Blower
with 71.9cc, 4.43hp powerful X-Torq engine; high capacity air flow, 914cfm
at housing, 685cfm at tube; 201 mph air speed; 8000rpm max power speed; with
adjustable throttle located on the blower tube handle
|
 |
HUSQVARNA 356BT "Low Noise" Backpack Blower
with 51.7cc engine, 177 mph maximum air velocity, 473 cfm; with Noise
Dampening material within the housing for a low 64 db(A) decibel rating;
tube mounted throttle control; 50fl.oz fuel capacity; 22.49 lbs w/o
accessories; features low vibration, snap-lock cover, and E-Tech II |
 |
RED MAX EBZ7001 Backpack Blower
Strato Charged digital injection 64.9 cc engine; 812 cfm
volume; 205 mph max air speed; 77db(a) noise level; dual
filter system, non-clog air intake; hip throttle |
 |
RED MAX EBZ8001 Backpack
Blower
with 71.9 cc Strato-Charged engine; 915 cfm volume; 201 mph max air speed;
dual filter system, non-clog air intake |
|
Push Type
Blowers (back to top) |
 |
GIANT-VAC 7hp (9tp) Extreme II Push-Type Blower
with 7hp (9 torque power) Briggs & Stratton Intek OHV engine;
15-3/4" welded steel impeller w/bolt-on hubs; 2100 cfm; one piece steel
housing; pneumatic Turf-Safe rear wheels w/grease ftg; no clog intake; blows
front or left
|
|
Tractor Mounted Blowers
(back to top) |
 |
GIANT-VAC Model 2000 Two-Way PTO Blower
High Velocity; P.T.O. driven (18 hp minimum); 3 point hitch
mount; power transmitted through Kevlar V-belts; 4 blade
22" balanced impeller; 10" O.D. pneumatic caster wheels
|
 |
THERRIEN PB-200 "Power Blow" 3-point Blower
which produces over ???? cfm of air power; for use on any tractor with
cat-1, 3 point hitch and 22-25 PTO hp; incl. 6-ply castor wheels, rounded
skid plate, & roller; using a three V-belt drive with tensioner and
36" dia. impeller |
THERRIEN PB-450 "Power Blow" 3-point Blower
which which produces over ???? cfm of air power; for use on any
tractor with cat-1, 3 point hitch and 45 PTO hp; incl. 6-ply castor wheels,
rounded skid plate, & roller; using a three V-belt drive with tensioner and
36" dia. impeller |
|
Truck
Loaders
(back to top) |
 |
GIANT-VAC 13hp Tail-Gate Truck Loader (STD)
with 13hp B&S Vanguard gas engine; recoil start; including 8"x10ft quick
release intake hose and handle; produces 2,740 cfm; 16.5" impeller dia. with
taper lock hub; welded housing and base; swivel 5"x5" discharge chute,
42" high
|
 |
GIANT-VAC 18hp Hitch Mount Truck
Loader (XL
with with 18hp B&S Vanguard gasoline engine; electric start, 1.5
gal fuel cap; 3,500 cfm air movement; 4-blade 3/8" steel, 20" dia. impeller;
including 10" x 10 ft intake hose and handle; swing arm extends 49"
from center of 2" receiver Class II hitch.
|
 |
GIANT-VAC 18hp Skid Mount Truck Loader
with 18hp B&S Vanguard gasoline engine; electric start, 1.5 gal fuel
cap; 3,500 cfm air movement; 4-blade 3/8" steel, 20" dia. impeller, 10" x
10' Hose
|
|
|
|
|
|
